There is always one thing you don’t know about indoor LED display!

1、 Matters needing attention when switching LED display screen: 1. Switching sequence: when switching on the screen: start the screen first, then turn on the screen; When turning off the screen: turn off the screen first, and then turn off the computer. If you turn off the computer first and don’t turn off the display screen, it will form a high bright spot on the screen, and simply burn out the lamp tube, with serious consequences. 2. Switch
1、 Precautions for switching LED display

1. Switch sequence: when the screen is on: start the machine first, then turn on the screen; When turning off the screen: turn off the screen first, and then turn off the computer. If you turn off the computer first and don’t turn off the display screen, it will form a high bright spot on the screen, and simply burn out the lamp tube, with serious consequences.
2. When switching on and off the LED display, the interval time should be more than 1 minute;
Instant open and immediately closed, so the impact on the display screen is great, simply due to the impact of large voltage and damage to the screen.
2、 Ambient temperature
When the ambient temperature is too high or the heat dissipation condition is not good, pay attention not to open the screen for a long time; The screen should be installed in the temperature scale environment of – 10 ℃ ~ 40 ℃. If it exceeds the temperature scale, temperature control equipment should be installed. It is forbidden to install the LED display near any heat source.
High ambient temperature or poor heat dissipation conditions lead to the life reduction of LED display.
3、 Environmental humidity
When the display screen is installed, the relative humidity of the environment should be 30% – 70%. When the indoor humidity is lower than 30%, static electricity simply occurs; When the indoor environment humidity is higher than 70%, the lamp will be affected with moisture.
4、 Corrosive gas environment
Please do not install the display screen in the corrosive gas environment containing acid or alkali components, such as near the chemical storehouse and indoor swimming pool (users are advised to stick the screen on the outside if necessary).
5、 Electromagnetic radiation environment
Please do not install the screen in the environment where the electromagnetic radiation and radio frequency radiation exceed the interference source of 5V / m. if necessary, it is necessary to block it
6、 Strong light shines on the environment
Please do not install the display screen in the direction of strong light, because the strong light will affect the display function of the display screen, and the brightness of the display screen is required to be higher.
7、 Insist on stable power supply
Adhere to the stability of power supply, install surge switch in the distribution box when necessary, and do a good job in grounding protection to prevent lightning strike. Do not use display screen in strong lightning weather and other adverse natural conditions.